5) Function Description
1. Location Update Schedule Modes
There are three location update modes. User can switch the working
mode via mobile phone APP, Click „Settings‟ button top of App
/ Set „Location update schedule‟.
1. Normal mode: Updates location data to APP every 10 minutes
when there is continuous movement
2. Power saving mode: Updates location data to APP every hour
when there is continuous movement.
3. Sleep Mode: It is the default mode and simply means that Geo
fence (safe zone) and location updates are both turned off. The
user can
locate the GPS tracker at any time in this mode with the "Locate"
button,
this mode is the best way to save battery.
Note:
①Under the above three modes, User can check device's current
location in real time by APP. Open the APP in the map interface,
click
on the locate button, and the GPS tracker will report the
up-to-date
position as soon as possible in a minute.
② In the map you can see the type of positioning in different
colors,
WIFI positioning is orange, GPS positioning is blue, LBS
positioning is
purple
③ In the 10 minutes or 1 hour movement tracking mode, the GPS
tracker will regularly update the location on the APP Map page and
History
④ The device supports GPS tracking (Outdoor), WIFI tracking
( Outdoor and indoor), LBS tracking (Outdoor and indoor).
The primary difference between GPS and Wi-Fi locating technologies
is in
the method of gathering location data. GPS uses satellites that
orbit
around the Earth to triangulate a user's location, whereas Wi-Fi
locating
technology uses relative network signal strength gathered at
network
access points. GPS tracking is available in out-door but mostly not
available for indoor. When the GPS tracker doesn‟t find GPS signal,
it willuse Wi-Fi or LBS tracking, Wi-Fi tracking is better for
indoor comparing
with LBS tracking.
